HOHM RUN XL

QSP Li-NMC 30.3A-38.6A 4007mAh 3.6V Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**

  • QSP Li-NMC 30.3A-38.6A 4007mAh 3.6V
     
    Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**
     
    Development started in 2017 with intent to only power Electric Vehicles.  It’s just too good to keep it restricted to only EV projects
     
    Using the proprietary “Ohm” cap in a 21.5mm width; 71.4mm length structure.  100% blend new to Hohm Tech International
     
    >4k capacity, >30A load, in a structure under 72g weight!
     
    Utilizing same identical seal compounds as Hohm RUN to ensure battery remains sealed in hot/cold weather and applications
     
    As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
     
    QSP Li-NMC with ample cobalt is proving to be desirable to other factories that Hohm Tech International is now licensing the technology to
     
    NEW bonding process that achieves greater purity: Cycle Life is increased to >70% nominal average of original capacity
     
    QSP unlocks consistent and reliable 1.5C charging rates
     
    World’s First NAI 21700 (non automotive intent) cell in compliance of ATD & ANSI, while achieving IEC certification
QSP Li-NMC | 30.3A-38.6A | 4007mAh | 3.6V
 
Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**
 
Development started in 2017 with intent to only power Electric Vehicles.  It’s just too good to keep it restricted to only EV projects
 
Using the proprietary “Ohm” cap in a 21.5mm width; 71.4mm length structure.  100% blend new to Hohm Tech International
 
>4k capacity, >30A load, in a structure under 72g weight!
 
Utilizing same identical seal compounds as Hohm RUN to ensure battery remains sealed in hot/cold weather and applications
 
As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
 
QSP Li-NMC with ample cobalt is proving to be desirable to other factories that Hohm Tech International is now licensing the technology to
 
NEW bonding process that achieves greater purity: Cycle Life is increased to >70% nominal average of original capacity
 
QSP unlocks consistent and reliable 1.5C charging rates
 
World’s First NAI 21700 (non automotive intent) cell in compliance of ATD & ANSI, while achieving IEC certification
QSP Li-NMC 30.3A-38.6A 4007mAh 3.6V
 
Can be charged at a tested/proven 6.01A rating: Yes, 6.01, as in SIX POINT ZERO ONE. It is possible, tested, proven, and approved**
 
Development started in 2017 with intent to only power Electric Vehicles.  It’s just too good to keep it restricted to only EV projects
 
Using the proprietary “Ohm” cap in a 21.5mm width; 71.4mm length structure.  100% blend new to Hohm Tech International
 
>4k capacity, >30A load, in a structure under 72g weight!
 
Utilizing same identical seal compounds as Hohm RUN to ensure battery remains sealed in hot/cold weather and applications
 
As with all ICHT cells, the Cathode Tag is utilizing UH Purity Aluminum: Ultra-High Purity (UHP) for internal resistance suppression
 
QSP Li-NMC with ample cobalt is proving to be desirable to other factories that Hohm Tech International is now licensing the technology to
 
NEW bonding process that achieves greater purity: Cycle Life is increased to >70% nominal average of original capacity
 
QSP unlocks consistent and reliable 1.5C charging rates
 
World’s First NAI 21700 (non automotive intent) cell in compliance of ATD & ANSI, while achieving IEC certification
电话咨询
产品中心
资讯中心
QQ客服